Description
Large: 10€
Height x Width: 50 cm x 8 cm
Small: 7€
Height x Width: 40 cm x 6,5 cm
3M self adhesive footpad sheet with diamond groove for ultimate traction and comfort. Specially used on Windsurfand Paddle boards. Available in either black or white in 6mm thickness but totaly flat.
Best for iniciate and intermediate Skimboards made by www.folhaskimboards.com
INFOS
For placing this prduct you just purchase, follow these steps:
– Make sure the surface is completely clean and dry.
– Place de Bar in the desired position.
– Once you figure out how you want to position your Bar, grab a pencil and trace around the Bar.
– Sand the area where the traction Bar will be located.
– If the finish of the board is “Textured” just sand the area and after clean with water before placing it. Don’t use alcohol or acetone.
– Peel of the adhesive paper on the Bar.
– Press the Bar onto the board and puch the Bar down with your hands.
– Put something heave on the Bar and wait for 12 to 24 hours.
Note:
– If some of the parts of the Bar are peeled, use SUPER 3 cyanoacrylate glue.
GOOD WAVES
